Complete Point of Sale System with Source Code

[Jimmie Webb]

If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.

Thanks,
-Jimmie Webb

[dlzc]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based
Point of Sale System, Please let me know.
 I am willing to part with all source code,
etc.

For free?

Post by Jimmie Webb
This system runs in Grocery Supermarkets,
Liquor Stores, and C-Stores.   I have taken
a new job and no longer sale or support this
software.  I'm looking for someone that can
breathe new life into it. Parts have been
ported over to harbour and run under windows.
 I just hate to see all my work over the past
20 years just gather dust.
Please email if you have a use for it.

You could post it on SourceForge.Org.
You could post it on the xHarbour community website.

David A. Smith

[Jimmie Webb]

Post by dlzc

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based
Point of Sale System, Please let me know.
 I am willing to part with all source code,
etc.

For free?

Post by Jimmie Webb
This system runs in Grocery Supermarkets,
Liquor Stores, and C-Stores.   I have taken
a new job and no longer sale or support this
software.  I'm looking for someone that can
breathe new life into it.  Parts have been
ported over to harbour and run under windows.
 I just hate to see all my work over the past
20 years just gather dust.
Please email if you have a use for it.

You could post it on SourceForge.Org.
You could post it on the xHarbour community website.
David A. Smith

Yes, for free.

I don't know if it's worth posting on SourceForge, etc. There is not
much documentation and it needs a little TLC to get it set up and
running. The Code is good and solid but there are a lot of options to
use different scanners, pinpads, printers, etc. which is not
documented that well.

[Jimmie Webb]

Also, I use some 3rd party libraries such as CT3 to access the com
ports, etc.

[dlzc]

Post by Jimmie Webb
Also, I use some 3rd party libraries such as
CT3 to access the com ports, etc.

CT3, including com port routines, is included with commercial
xHarbour. Other 3rd party libs, probably not.

Your choice...

David A. Smith

[Scott Coffey]

On Fri, 6 Nov 2009 08:51:26 -0800 (PST), Jimmie Webb

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Jimmie,

I support a POS system (retail shoe stores) written in Clipper. I
would certainly be interested in your code, if only to see how someone
else approaches the same types of issues. You can reach me at:

scottcoffey AT scott-coffey DOT NET.

Thanks,
Scott

[JoeSoft]

Post by Scott Coffey
On Fri, 6 Nov 2009 08:51:26 -0800 (PST), Jimmie Webb

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Jimmie,
I support a POS system (retail shoe stores) written in Clipper. I
would certainly be interested in your code, if only to see how someone
scottcoffey AT scott-coffey DOT NET.
Thanks,
Scott

I have too my one POS system in clipper S87. Iwould like intersed in
your code to see anoder approachsh the same thing.
Please contact me at ***@texpert.hr

Jozo Bažant

[Dennis]

Post by JoeSoft

Post by Scott Coffey
On Fri, 6 Nov 2009 08:51:26 -0800 (PST), Jimmie Webb

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know.  I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores.   I have taken a new job and no longer sale or support this
software.  I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows.  I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Jimmie,
I support a POS system (retail shoe stores) written in Clipper.  I
would certainly be interested in your code, if only to see how someone
scottcoffey AT scott-coffey  DOT NET.
Thanks,
Scott

I have too my one POS system in clipper S87. Iwould like intersed in
your code to see anoder approachsh the same thing.
Jozo Bažant- Hide quoted text -
- Show quoted text -

I have a need for a Clipper 5 based POS. I would like to have a copy
of your POS including the code, etc. I have e-mailed you the same
message earlier. You can send the copy to my e-mail address. Thanks
and good day.

Dennis A. Lim

[Marek Rz]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I am also interested.
Could you send it to me?

My adress: marekrz AT rubikon DOT pl

Thank you
Marek Rz

[Jimmie Webb]

Thanks for all the interest in the point of sale software. I am
currently cleaning up the source and dbfs to get it in state in which
I can send it to everyone. I apologize for the delay. Expect to here
something from me soon.

Thanks,
Jimmie

[g***@gmail.com]

Hi Jimmie

Did you ever complete this, if yes are you wiling to share still,
I'm looking for it purely as a way to retrain myself in Clipper, scratching a itch, use to work for many years in the clipper world, pretty much exited 97.

George
georgelza a t g mail com

Post by Jimmie Webb
Thanks for all the interest in the point of sale software. I am
currently cleaning up the source and dbfs to get it in state in which
I can send it to everyone. I apologize for the delay. Expect to here
something from me soon.
Thanks,
Jimmie

[v***@yahoo.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know.  I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores.   I have taken a new job and no longer sale or support this
software.  I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows.  I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Dear Jimmie,

Can you please send it to address vmk1508 at yahoo dot com

Regards,


V.Mahesh Kumar.

[Dennis]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know.  I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores.   I have taken a new job and no longer sale or support this
software.  I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows.  I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Dear Jimmie,

I have a need for a Clipper 5 based POS. I would like to have a copy
of your POS including the code, etc. I have earlier sent the same
messsage to your e-mail address. You can e-mail me the copy to my e-
mail address. Thanks and good day.

Dennis Lim

[OldBuickParts]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know.  I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores.   I have taken a new job and no longer sale or support this
software.  I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows.  I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Jimmie,

I too have an old POS system that I am currently supporting. I would
love to have a copy of yours.

Thanks

Jeff

[Qatan]

Hello Jimmie,

I am also interested in your nice POS.
I would like to use it as reference to deal with different hardware
like your program does.
Could you please send it to me?


My email:

suporte AT tribalbrasil DOT com


Thank you for sharing your experience with us.
Regards,

Qatan

[marcel2be]

Hallo Jimmie,
I am also interested.
Could you send it to me?
mgybels at gmail dot com

[ibu]

hi.you can send me the source code at ***@gmail.com.thanx in advance.
yours truly,
ibrahim fareed.

[c***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Hi Jimmie,

Good day. I know you posted a long time ago but if you're still willing to send a copy kindly send me one pls at creativesoftwaregun @ gmail dot com. Thanks.

[l***@gmail.com]

Yes I would also be interested lawrence at 2die4 dot com

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

[h***@gmail.com]

Hi Jimmie,
I hope you are there, I just found this and at this time what you ofer is something that I really need.

if you can send it to me I will appreciate, is hugo0174 google mail
Thank you very much

[a***@gmail.com]

Hi Jimmie Webb,

Good Day, Hope you are doing well. I am also interested in your Clipper 5 based POS. Could you please send me at ashr.raza @ gmail dot com. It will be really appreciated.

Thank you.

Ashr Raza

[CmdrDick]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I could use a copy of that to possibly teach me Clipper
I used dbaseIII back in the '80's and loved it.
I've been away from that since but would like to revive some of the old code now that I'm retired and have the time.
Anyone want to part with a copy of Clipper 5.2e? I can't afford too much.
Thanks
radwilson at cox dot net

[dlzc]

Post by CmdrDick

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I could use a copy of that to possibly teach me Clipper

http://www.ghservices.com/gregh/clipper/

Lots of source code here:
http://www.the-oasis.net/

And sources for the Norton Guides (the manual) here:
http://www.itlnet.net/programming/program/

David A. Smith

[w***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Goodday Jimmie,

I would appreciate a copy of your code, ( wal2299 at gmail.com )

Thanks.

[m***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Hello

I am interested is talking to you about buying your source code for the POS.....

[g***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

can u provide source code of Point of sale Software me. if agree plz mail me.

[t***@gmail.com]

Goodday Jimmie,

I would appreciate & thanksful a software & copy of your code,
( teguhkeris at gmail.com )

Thanks.

[Mr. Man-wai Chang]

Post by t***@gmail.com
I would appreciate & thanksful a software & copy of your code,
( teguhkeris at gmail.com )

Your country?

Does your country have software companies selling POS solutions?

[d***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I would also like a copy of your Clipper POS source code. If you could email it to me at DrRickdc @ gmail.com I would greatly appreciate it.

Thanks in advance,
DrRick

[c***@gmail.com]

I too would like a copy, if that is okay?
Please send to clint 42 AT gmail.com (please remove spaces).

Thanks,

Alan

[Grella]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I too would like a copy. Canada

[g***@gmail.com]

I would like a copy, if that is okay.
Please send to ***@gmail.com

Thank You.
Mark

[k***@gmail.com]

I am also interested in your nice POS software .
Could you please send it to me?


My email:

nhojken AT yahoo.com

thank.

[Mark Kim]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Dear Jimmie,

Can you please send it to ***@gmail.com,I lOVE TO PAY FOR 20 YEARS YOUR EXPERIENCE TOO.iF YOU DON'T MINE.
Thank You.

Mark

[[e-mail]]

Dear Jimmie,

Yes, I would be interested in receiving your code to analyze how you addressed certain problems.

I suggest that you upload your source code and relevant .dbf files as one Zip in drop-box and post the link here, so that all who are interested can download without bothering you.

If you want to send individual copies, then pls send it to ***@_gmail.com, please remove the underscores.

Warm regards,

Jayadev

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

[m***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

please send me the project

[Jasim A Basheer]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Nice to see an old thread with renewed interest.

Github (http://github.com) would be a good place to post open-source/public domain source code.

If anyone is interested in POS solutions, feel free to check out https://github.com/jasim/EasyAccounts. I wrote it as a high-school student, so beware of the code quality.

(So much code and so much love gone to waste as technologies cycle. Nostalgic for the ole times.)

[antreas]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

send ***@icloud.com please

[r***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Hi Jimmie,

I am very interested to access your code. I was a long-time Clipper programmer. I am working on Visual Objects apps now.

rjpajaron $ gmail.com


Regards,

Rene

[s***@gmail.com]

Hello Jimmie,

May I Kindly have the code please.

Please assisty

[n***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Please send a copy to my email

Regards

Nicanor

[b***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I would like to get a copy please.

[j***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Hello, one copy please.

[Mr. Man-wai Chang]

Post by j***@gmail.com
Hello, one copy please.

Shouldn't you have asked for a demo first? :)

[Bingo EZ One]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

If you're still watching this group, maybe you would like to send me yours. I'd like to study migrating clipper to harbour. I'm still using clipper program in 21th century... :)

[Clipper_Lives]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

I would like the source code.

[Joigito]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

me too

jorgedigitall at gmail.com

[i***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Dear Jimmie Webb,

Can you please send it to my email : ***@google.com

Regards,


Inan Latief

[Jimmie Webb]

https://drive.google.com/folderview?id=0B-ZERg1OzC8pdUZjX0JEOGtxemM&usp=sharing

Here is the Google drive link. Please drop me a note and let me know that you have accessed it.

Good Luck

Jimmie Webb

[m***@gmail.com]

Hi Jimmie,

I am interested. Would you like to send me a copy.

Best Regards.

Med


( ***@gmail.com)

[dlzc]

Post by c***@gmail.com
Hi Jimmie,
I am interested. Would you like to send me a copy.

Did you not see that he already posted to a link that you can download?
https://groups.google.com/d/msg/comp.lang.clipper/LSgvuJqM5qw/zB4LgyQhCgAJ

David A. Smith

[s***@gmail.com]

Thanku

[e***@gmail.com]

Hello jimmie webb i want this software and i can give your software new life and new breath please send me this software with source code on my email
***@gmail.com

[dlzc]

Post by e***@gmail.com
Hello jimmie webb i want this software and i can
give your software new life and new breath please
send me this software with source code on my email

The download link he provided is still active:
https://groups.google.com/d/msg/comp.lang.clipper/LSgvuJqM5qw/zB4LgyQhCgAJ

David A. Smith

[a***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

pls send me details to ***@hotmail.com

[dlzc]

Dear app...:

On Monday, January 8, 2018 at 10:02:48 PM UTC-7, ***@gmail.com wrote:
...
His google drive link is still active:
https://drive.google.com/folderview?id=0B-ZERg1OzC8pdUZjX0JEOGtxemM&usp=sharing

David A. Smith

[a***@gmail.com]

thank you

[h***@gmail.com]

Post by Jimmie Webb
...
https://drive.google.com/folderview?id=0B-ZERg1OzC8pdUZjX0JEOGtxemM&usp=sharing
David A. Smith

How to build and run this project? anyone can post video example ?

[h***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

How to build and run this project. Could you help me take a instruction video? I really love this. Thanks you so much.

[Mr. Man-wai Chang]

Post by h***@gmail.com

Post by Jimmie Webb
...
-Jimmie Webb

How to build and run this project. Could you help me take a instruction video? I really love this. Thanks you so much.

Don't hesitate to email him as well.

[s***@gmail.com]

Can anyone give me link from where i can download clipper 5 and all required liberaries?

[dlzc]

Post by s***@gmail.com
Can anyone give me link from where i can download
clipper 5 and all required liberaries?

You cannot. Was never released into the public domain. There are open source (and commercial) packages that will compile Clipper 5.3 source code:

http://www.xharbour.org/
https://www.xharbour.com/
... and they have a newsgroup comp.lang.xharbour
https://harbour.github.io/
... and they have a newsgroup too, just on that webpage somewhere.

The only trick is if your source code depended on 3rd party libraries.

David A. Smith

[Char Gutierrez]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Can you please send it to ***@gmail.com Thank you.

[dlzc]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

His google drive link is still active:
https://drive.google.com/folderview?id=0B-ZERg1OzC8pdUZjX0JEOGtxemM&usp=sharing

David A. Smith

[dlzc]

The link he provided is still active. You can download it yourself.

David A. Smith

[l***@gmail.com]

Can you please send it to ***@gmail.com
Thank you.

[Char Gutierrez]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

pls. send it to ***@[e-mail]

[s***@gmail.com]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Please send a copy to ***@gmail.com Hope this offer is still available. And thanks in advance. Steve

[j***@gmail.com]

Can you please send it to ***@gmail.com
Thank you.

[dlzc]

And if you had bothered to read this thread, you'd know that his Google Drive link is STILL active.
https://drive.google.com/folderview?id=0B-ZERg1OzC8pdUZjX0JEOGtxemM&usp=sharing

... get it yourself.

David A. Smith

[WT29]

I have a similar problem - a complete POS "upgraded" to xHarbour. No 3rd party libraries required.

Inventory, ordering/receiving, basic accounting (debtors & creditors), stocktake, customer management.

https://github.com/wt29/bpos

Would love it if someone would take it on. The last store I know using this is closing at the end of the September 2020.

[Raphael MD]

Post by WT29
I have a similar problem - a complete POS "upgraded" to xHarbour. No 3rd party libraries required.
Inventory, ordering/receiving, basic accounting (debtors & creditors), stocktake, customer management.
https://github.com/wt29/bpos
Would love it if someone would take it on. The last store I know using this is closing at the end of the September 2020.

Hello, It is possible to compile this code using Clipper 5.2 or only xHabour?
I'm figure out how to compile in xHabour but I'm struggling to do so.

Thanks

[Dr. Muthuramalingam Ramasubbu]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Hi,
We are on Clipper for 30+ years and successfully migrated to Harbour 64 and now using MySql without modifying the source much.
Will be happy to support your client if the need arises.
Let me know
S G M Ramasubbu

[Inan Latief]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

[Inan Latief]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

can you send the program to me, for me to try to make an example in the minigui program.
Thank you so much

[dlzc]

Post by Inan Latief
can you send the program to me, for me to try to make an example in the minigui program.

The download link is still active.
https://drive.google.com/drive/folders/0B-ZERg1OzC8pdUZjX0JEOGtxemM?resourcekey=0-8AHEE2u3rdwL7c9xnt8MYg

Do you really think a 13 year old thread will still stay active, in terms of author?

David A. Smith

[Claudio Cesar]

Post by dlzc

Post by Inan Latief
can you send the program to me, for me to try to make an example in the minigui program.

The download link is still active.
https://drive.google.com/drive/folders/0B-ZERg1OzC8pdUZjX0JEOGtxemM?resourcekey=0-8AHEE2u3rdwL7c9xnt8MYg
Do you really think a 13 year old thread will still stay active, in terms of author?
David A. Smith

LOTS OF VIRUSES IN THOSE FILES.
TAKE CARE.

[dlzc]

Post by Claudio Cesar

Post by dlzc
The download link is still active.
https://drive.google.com/drive/folders/0B-ZERg1OzC8pdUZjX0JEOGtxemM?resourcekey=0-8AHEE2u3rdwL7c9xnt8MYg
Do you really think a 13 year old thread will still stay
active, in terms of author?

LOTS OF VIRUSES IN THOSE FILES.
TAKE CARE.

Also a lot of false hits on anything that was complied as Clipper. It is supposed to be source code, don't use any compiled modules. One of the reasons Micro$haft denigrated the COMMAND.COM layer, is because they could not reliably tell the difference between valid code / module, and virus. Too easy to find common code fragments, and infer "VIRUS!!!".

David A. Smith

[Claudio Cesar]

Post by dlzc

Post by Inan Latief
can you send the program to me, for me to try to make an example in the minigui program.

The download link is still active.
https://drive.google.com/drive/folders/0B-ZERg1OzC8pdUZjX0JEOGtxemM?resourcekey=0-8AHEE2u3rdwL7c9xnt8MYg
Do you really think a 13 year old thread will still stay active, in terms of author?
David A. Smith

LOTS OF VIRUSES IN THOSE FILES.
TAKE CARE.

[Inan Latief]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

Can send the program to me, for me to try to make an example in the minigui program

[Jose canto]

Post by Jimmie Webb
If anyone has a need for a Clipper 5 based Point of Sale System,
Please let me know. I am willing to part with all source code, etc.
This system runs in Grocery Supermarkets, Liquor Stores, and C-
Stores. I have taken a new job and no longer sale or support this
software. I'm looking for someone that can breathe new life into it.
Parts have been ported over to harbour and run under windows. I just
hate to see all my work over the past 20 years just gather dust.
Please email if you have a use for it.
Thanks,
-Jimmie Webb

hello good night am interesting on it am currently opening my first store